top of page

Metal Bonded Rubber Applications

​

Metal bonding can be performed on virtually any rubber part. This is what makes it so versatile and popular. There are many applications for the use of metal bonded rubber. Here are a few:

  • Automotive: Gaskets, seals, bushings, engine mounts, hangers, bumpers

  • Agriculture: Seals, isolation mounts, pumps, stabilizers, ball joints, cab isolation

  • Medical: O-rings, tubing, extrusions, pump compressor isolation

  • Mass Transit: Valve seals, pedal, suspension, engine parts

  • Construction: Conveyor belt, vibration reduction, isolation mounts, stabilizers

​

Metal bonding ensures the highest level of security. Bonded metal to rubber parts can last a long time, keeping users and equipment safe. Optimal outcomes are achievable as long as the right materials are used. 

The rubber to metal bonding process
Before we can use any rubber to metal bonding adhesives, the surface must be prepared to ensure optimal bond performance. Any oils are stripped from the metal either via solvent degreasing or using an alkaline cleaning process. If there is any sign of rust, this needs to be thoroughly removed too.

Once the component has been prepared, we keep it in a clean, low humidity environment to prevent further contamination. Any handling of the component is undertaken with gloved hands, to prevent the natural oils on skin from coming into contact with the metal.

Next, we use a heat activated adhesive to provide the rubber to metal bonding. This is applied using a spray application. Once this is complete, the metal is ready for production.

CLS rubber to metal bonding..jpg

Production
The insert in placed into the cavity of the mould, and from there the normal rubber moulding process can begin. The heat from the moulding process activates the adhesives on the metal, bonding the insert to the rubber around it.

Every rubber to metal bonding job we complete undergoes a rigorous quality control and testing phase, ensuring every single part is produced to the very highest of standards.

bottom of page